Description
Autool Model SDT206 leak detector
A professional automatic tightness tester for pipes, hoses, fittings and installations using a smoke generator. It helps us quickly and accurately locate leaks in piping systems within a few minutes. The device can be used for intake system tests, turbocharger test, exhaust system test, cooling system test, vehicle seal test, fuel tank system test, and tests of various pipe fittings.
The device is powered by a 12V battery.
IMPORTANT !!!!!
- On first use, pour in 10 to 20 ml of oil.
- Be careful not to exceed this range.
- Before filling, pour the remaining oil out of the detector and only continue refilling with new oil in the range of 10 to 20 ml.
- Refill only when the smoke thins out or does not appear at all
- DO NOT use the detector for 8 minutes without a break, it needs breaks.
- Conditions for maintaining the warranty
How it works:
- 1. Pour 20 ml of e.g. baby oil into the leak detector.
- 2. Open the engine cover and hang the leak detector on the cover.
- 3. Disconnect the hose that is to be connected to the detector.
- 4. Connect the detector to a DC12V battery.
- 5. Turn on the power switch.
- 6. After 30 seconds, the tube will fill with smoke.
- 7. Check the leak points.
- The detector is equipped with a safety function; if it exceeds the operating limit, above 75 degrees, it automatically shuts off the power. In this case, stop operation and return to it only after it has cooled down.
The kit includes:
- Autool SDT206 tester with a pressure gauge and indicator.
- terminal supply cable
- Long smoke hose
- Hook with a pressure nut
- Black tips 8 pcs
- Red tips 8 pcs
- Universal adapter – air pump
- Valve core wrench
- Special EVAP connector
- Bottle of oil
- Hard rubber plug for the hose
- Paper manual in English
- Original packaging










Reviews
There are no reviews yet