Description
LAUNCH X-431 IMMO PLUS
It is an advanced diagnostic and programming tool for key programming, programming and adaptation of ECUs (electronic control units). It is equipped with a wireless VCI DBScar VII and the XPROG 3 programmer. Its main functions include: Key programming, ECU programming and adaptation, EEPROM read and write, MCU read and write, Mercedes-Benz key support, engine reading in BENCH mode, transmission data read and write, support for multiple brands and types of microchips and chips: Support for more than 50 vehicle brands and 460 types of microchips and chips. The device is equipped with IMMO, Key Programming, VAG Guided Function, ECU coding, AutoVin, 39+ service functions (shortcuts such as oil service reset, brake pad replacement, DPF regeneration…) and many more… It features an 8″ touchscreen, a quad-core processor, a camera with flash, and an armored plastic Rugged workshop case! It is powered by a very fast Android operating system. Original, legal hardware with online updates including 2 years of updates! The device supports the new CANFD and DOIP protocols. A subscription to SECURITY GATEWAY (SGW) ACCESS from car manufacturer FCA can be purchased for the device to enable diagnostics of their latest vehicles. VAG Guided Function: Professional step-by-step instructions require no repair skills of your own and guide you to the perfect resolution of problems.
A device from the authorized LAUNCH distribution in the Czech Republic!
Original, legal equipment with online software updates!
The diagnostic tool includes the Czech language, with an additional Wi-Fi translator option.
Diagnostic tool capabilities:
- reading fault codes
- clearing fault codes
- displaying live parameters (also as graphs and gauges: several modes)
- component adjustments (throttle body, EGR valve, engine computer, etc.)
- actuator tests (activating the EGR valve, fan motor, injectors, central locking, etc…).
- resetting service inspections and oil checks
- injector coding
- complete DPF service (soot level check, reset, regeneration, adjustment after replacement).
- complete SCR ADBLUE service (tank level reset, injector reset..)
- complete EPB handling (retracting calipers when replacing pads, setting piston pressure, pad thickness)
- automatic scanning of all vehicle modules
- reading information from the control module
- clearing recorded values
- reading the VIN code
- resetting control unit programming
- bleeding the master cylinder
- level calibration
- steering angle sensor calibration
- idle speed setting
- ignition timing advance angle
- DoIP and CAN FD protocol support
- Automatic vehicle detection support (AutoVin)
- Online CODING
- PMI function for Ford & Mazda
- Offline Programming: Mercedes variant coding, VW long coding, Ford/Mazda PMI.
- Guided Function (VAG group only)
- FCA SGW Security Gateway module: free login to an FCA account to unlock the SGW. Compatible with Fiat, Chrysler, Alfa Romeo, etc.
- and many more…
Includes shortcuts for the most important service procedures:
- service inspection reset, oil check
- complete electric parking brake EPB service (retracting calipers when replacing pads, setting piston pressure, pad thickness).
- DPF filter regeneration (dust quantity check, burn-off, regeneration, adjustment).
- transmission adjustment
- steering angle sensor calibration
- new battery adaptation
- throttle body adaptation
- injector coding
- headlight adjustment
- suspension adjustment
- NOx sensor reset
- ADBLUE reset
- and many more…
Some of the IMMO functions include:
- All-keys-lost solution for Volkswagen and Audi vehicles
- PIN reading, key matching, immobilizer replacement, dealer key creation
- Reading and writing BMW CAS4+ and FEM chips
- Reading the BMW engine INS code (Reading the BMW engine INS code)
- IMMO data synchronization for a second-hand replaced ABS module on the Focus 2014MY
- Support for replacing or cloning the engine control unit on the VW/Audi MQB platform (the vehicle’s original engine control unit data is not required; it can be read directly from the key).
- Support for replacing or cloning the transmission control unit of the VW/Audi MQB platform.
- Support for replacing the fifth-generation Audi transmission control unit (0AW/0B5)
- Support for reading/writing and cloning the fourth-generation VW UDS engine control unit.
- Support for cloning in BENCH mode without disassembly for more than 170 types of Bosch engine control units, more than 10 types of Siemens engine control units and 18 types of transmission control units (covering various European, American and Asian models and continuously expanding).
- Support for the erase function for the Mercedes-Benz engine, transmission, EIS and BMW transmission.
- Support for the matching function and password calculation function for all Chery sedan and JAC passenger car models up to 2022.
- Integrated key matching/copying functions, anti-theft IC reading and writing, and ECU reading and writing, etc.
- Supports common ECU/MCU/EEPROM of major manufacturers, with more than 1,200 product models and constant updates.
- Supports ECU replacement for the 4th generation VW/AUDI engine;
- Supports ECU replacement for the 5th generation of VW/AUDI Bosch and Siemens engines.
- Supports all lost and replaced for the fourth generation AUDI EZS, comfort ECU and KESSY IC.
- Supports reprogramming the 8HP BMW F and G transmission ECU to blank.
- Supports cloning of Bosch, ZF, GETRAG, Temic, DELCO and other transmission control units (TCM).
- Supports replacement of the BMW CAS4/CAS4+ module.
- Supports cloning and replacement of the ECU for BMW Siemens engines.
- Password erasure for the Mercedes-Benz engine and transmission up to 3S.
- PORSCHE key matching / copying / CS code acquisition / dealer key generation function
- Toyota all-keys-lost (before 2022)
- Volvo all-keys-lost (-2022)
- Peugeot all-keys-lost
- Supports all lost Toyota 8A 2018+ smart keys and BYD keys (using an emulator)
Option to expand with modules for extended functionality:
- WIFI Printer: printing of diagnostic data/reports.
- BST360 battery tester: For battery starting system test, battery charging system test, battery condition test.
- VSP-600 videoscope: A camera with a small lens that lets you see invisible parts and provides a direct view of the engine, transmissions, compressors, cylinder heads and valves, and body components.
- TSGUN: With it you can program tire pressure sensors (OE, Launch).
- O2-2 Scopebox: Detects high-level faults on various electrical components such as sensors, actuators and circuits.
- S2-2 Sensorbox: diagnoses/tests/simulates most vehicle sensor faults.










Reviews
There are no reviews yet