Description

AUTOOL leak detector model SDT101
A professional automatic leak tester for pipes, hoses, couplings and installations using a smoke generator. It helps us locate leaks in pipe systems quickly and accurately within a few minutes. The device can be used for testing the intake system, turbocharger test, exhaust system test, cooling system test, vehicle sealing test, fuel tank test, and testing various pipe fittings.
The device works after connecting to an external air source such as a compressor plus a 12V battery

IMPORTANT !!!
- On first use, pour in 10 to 20 ml of oil
- Be careful not to exceed this range.
- Before filling, pour out the remaining oil from the detector and refill only with new oil from 10 ml to 20 ml.
- Refill only when the smoke thins out or is completely absent.
- DO NOT use the detector for more than 8 minutes in a row without a break, so that the pump cools down
Use:
- 1. Pour 10 to 20 ml of e.g. baby oil into the leak detector.
- 2. Open the engine cover and hang the generator on the hood.
- 3. Disconnect the hose that is to be connected to the generator.
- 4. Connect the generator to the DC12V car battery.
- 5. Turn on the power switch.
- 6. After 30 seconds, the tube fills with smoke.
- 7. Check the leak points.
- The generator has overheating protection; if it exceeds 75 °C, it automatically switches off the power. In such a case, interrupt operation and return to it after it has cooled down.

The set includes:
- SDT101 smoke generator
- power cable
- Long smoke hose
- Smoke hose with aluminum end fitting
- Valve core wrench
- Special EVAP connector
- Bottle with fluid for the smoke generator
- Operating manual!
- Original packaging








Reviews
There are no reviews yet