Description

AUTOOL SDT103
New on the Czech market
A device from the authorized Czech Autool distribution!
A professional automatic leak tester for pipes, hoses, couplings and installations using a smoke generator. It helps us locate leaks in pipe systems quickly and accurately within a few minutes. The device can be used for testing the intake system, turbocharger test, exhaust system test, cooling system test, vehicle sealing test, fuel tank test, and testing various pipe fittings.
The device works after connecting to an external air source such as a compressor plus a 12V battery

IMPORTANT BEFORE USE!!!
- On first use, pour in 10 to 20 ml of oil
- Be careful not to exceed this range.
- Before filling, pour out the remaining oil from the detector and refill only with new oil from 10 ml to 20 ml.
- Refill only when the smoke thins out or is completely absent.
- DO NOT use the detector for more than 8 minutes in a row without a break, so that the pump cools down
USE:
- 1. Pour 10 to 20 ml of e.g. baby oil into the leak detector
- 2. Open the engine cover and hang the generator on the engine hood.
- 3. Disconnect the tube that will be connected to the generator.
- 4. Connect the generator to the DC12V car battery.
- 5. Turn on the main switch.
- 6. After 30 seconds, the pipe fills with smoke.
- 7. Check the leak points.
The detector has overheating protection – if the temperature exceeds 75 °C, it automatically switches off the power. In such a case, stop working and come back when it has cooled down.

The set includes:
- SDT103 smoke generator
- Power cable
- Long smoke hose
- Smoke hose with ALUMINUM end fitting
- Valve core wrench
- Special EVAP connector
- Bottle with fluid for the smoke generator
- Paper OPERATING MANUAL in POLISH!
- Original packaging
- Touch pen for touch screens
AUTOOL SDT103 SMOKE GENERATOR LEAK TESTER









Reviews
There are no reviews yet