Sale!

AUTEL MaxiIM IM608PRO II – IM608+XP400 PRO+IMKPA+GBOX+APB112

Original price was: 97999 Kč.Current price is: 87000 Kč. 71901 Kč excl. VAT

The latest key programming tool: It is equipped with the XP400 PRO key programmer and the MaxiFlash ECU programmer, which provide complete coverage of IMMO and programming functions.

Complete key programming and IMMO: The Autel IM608 Pro II key fob programmer is equipped with PIN/CS reading (all keys lost), key generation, key learning, remote learning; IMMO data backup/restore, ECU IMMO reset/adaptation, restore/coding; transponder read/write, EEPROM/MCU read/write, etc. — advanced IMMO and key programming functions.

10,000+ vehicle and FCA coverage: The Autel IM608 Pro II diagnostic scanner and key programmer can work with more than 10,000+ models from the USA, EU and Asia, including 12V sedans, light trucks and SUVs. The latest IM608 Pro II scanners are FCA-certified for SGW module access.

5 in stock

Categories: ,

Description

AUTEL MaxiIM IM608ProⅡ

IM608+XP400 PRO+IMKPA+GBOX+APB112

with 2 YEARS OF SOFTWARE UPDATES!
(the latest 2023 model, Android 10, j2534 JVCI+)

The IM608 PROII is the most advanced and unique key programmer and diagnostic tool in one. The device combines advanced key programming, diagnostics of all electronic systems and advanced service functions in a single 10.1-inch Android touchscreen tablet. The tester is equipped with the XP400PRO key programmer and the MaxiFlash JVCI+ ECU programmer, which provide full support for IMMO functions including programming. The device features Guided Function,UNIT CODING, AutoVin, service functions (shortcuts such as oil service reset, brake pad replacement, DPF regeneration…)… Original, legal hardware with online updates including 2 years of updates! The device supports the new CANFD and DOIP protocols. A subscription to SECURITY GATEWAY (SGW) ACCESS from car manufacturers Mercedes, Nissan, Renault, FCA, Volkswagen Group can be purchased for the device to enable diagnostics of their latest vehicles.

The device includes the Czech language !!! (Menu, Fault codes, Live parameters, Service procedures

 

IMMO:

  • Professional key programming via the XP400 programmer and the MaxiFlash JVCI+ ECU programmer for full Immo support.
  • Intelligent mode for guided and automatic key learning
  • Expert mode for advanced key learning
  • Reading PIN / CS (all keys lost), key generation, key learning, remote learning
  • Resetting / adapting the ECU IMMO, restoration / coding
  • Reading / writing transponder data, ECU / MCU / EEPROM data (e.g. 9S12 encryption chip), IC card, remote frequency detection
  • Key learning AUDI Q5/A4/A5 2015-2017
  • Key learning VW MQB
  • Key learning and adaptation BMW FEM/BDC
  • Key learning and adaptation BMW CAS4
  • Mercedes key learning
  • 2015-2018 Land Rover & Jaguar key writing via dump
  • Volvo Smart Key Learning/button style

 

Diagnostic tool capabilities:

  • reading fault codes
  • clearing fault codes
  • displaying live parameters (also as graphs and gauges: several modes)
  • component coding
  • Full support of live parameters during Live Data operation
  • adjustments of sub-components (throttle body, EGR valve, engine computer, etc.)
  • actuator tests (activating the EGR valve, fan motor, injectors, central locking, etc…).
  • resetting service inspections and oil inspections
  • injector coding
  • key coding
  • complete SCR ADBLUE service (tank level reset, injector reset..)
  • complete DPF service (soot level check, reset, regeneration, adjustment after replacement).
  • complete EPB handling (retracting calipers when replacing pads, setting piston pressure, pad thickness)
  • automatic scanning of all vehicle modules
  • reading information from the control module
  • clearing recorded values
  • reading the VIN code
  • resetting control unit programming
  • bleeding the master cylinder
  • level calibration
  • steering angle sensor calibration
  • idle speed setting
  • Automatic vehicle detection support (AutoVin)
  • Guided Function
  • ONLINE CODING
  • ONLINE PROGRAMMING
  • and much more…

 

Includes shortcuts for the most important service procedures:

  • service inspection reset, oil check
  • complete electric parking brake EPB service (retracting calipers when replacing pads, setting piston pressure, pad thickness).
  • regeneration of the DPF filter (dust quantity check, burn-off, regeneration, adjustment).
  • transmission adjustment
  • steering angle sensor calibration
  • new battery adaptation
  • throttle body adaptation
  • injector coding
  • headlight adjustment
  • suspension adjustment
  • ADBLUE reset
  • NOx sensor reset
  • and many more

 

Reviews

There are no reviews yet

Add a review
AUTEL MaxiIM IM608PRO II - IM608+XP400 PRO+IMKPA+GBOX+APB112 AUTEL MaxiIM IM608PRO II - IM608+XP400 PRO+IMKPA+GBOX+APB112
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review
* Please confirm that you are not a robot
0